TP-Link 54Mbps Wireless Access Point TL-WA501G User Manual

TL-WA501G 54M Wireless Access Point User Guide
Figure 4-2: Failed result of Ping command
If the result displayed is similar to that shown in figure 4-2, it means that your PC has not
connected to the AP. Please check it following these steps:
1. Is the connection between your PC and the AP correct?
Note: The LED of LAN port on the AP and LED on your PC's adapter should be lit.
2. Is the TCP/IP configuration for your PC correct?
Note: If the AP's IP address is 192.168.1.1, your PC's IP address must be within the
range of 192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1
- 9 -

TP-Link 54Mbps Wireless Access Point TL-WA501G Specifications

General

Brand	TP-Link
Model	54Mbps Wireless Access Point TL-WA501G
Category	Wireless Access Point
Language	English