TL-WA501G 54M Wireless Access Point User Guide
Chapter 2: Introduction
2.1 Overview of the AP
The TL-WA501G 54Mbps Wireless Access Point is the basic building block of a wireless LAN
infrastructure. It provides connectivity between Ethernet wired networks and radio-equipped
wireless notebook systems, desktop systems, print servers, and other devices.
The TL-WA501G 54Mbps Wireless Access Point acts as a bridge between the wired LAN
and wireless clients. Connecting multiple TL-WA501G Access Points via a wired Ethernet
backbone can further lengthen the wireless network coverage. As a mobile computing
device moves out of the range of one access point, it moves into the range of another. As
a result, wireless clients can freely roam from one Access Point to another and still
maintain seamless connection to the network.
In the most attentive wireless security, the TL-WA501G 54Mbps Wireless Access Point
provides multiple protection measures. It can be set to turn off wireless network name
(SSID) broadcast so that only stations that have the SSID can be connected. The AP
provides wireless LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and
WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also
supports VPN pass-through for sensitive data secure transmission.
The TL-WA501G 54Mbps Wireless Access Point complies with the IEEE 802.11g/b
standards so that the data transmission rate is up to 54Mbps. It adopts 2x to 3x eXtended
Range
TM
WLAN transmission technology so that transmission distance is 2-3 times of
traditional IEEE 802.11g/b solutions, up to a distance of 855.36m tested in China.
Transmission range is extended to 4-9 times. It is compatible with all IEEE 802.11g and
IEEE 802.11b products.
2.2 Features
¾ Complies with IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u standards
¾ Adopts 2x to 3x eXtended Range
TM
WLAN transmission technologies
¾ Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps wireless LAN data
transfer rates
¾ Provides 64/128/152-bit WEP encryption security
¾ Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication and TKIP/AES
encryption security
¾ Built-in DHCP server supporting dynamic IP address distributing
¾ Supports MAC address filtering
¾ Supports multiple operating modes (Access Point, Client, Repeater, Point to Point,
Point to Multi-point)
¾ Supports TCP/IP, DHCP, SNMP
¾ Supports Traffic statistics
¾ Supports firmware upgrade
¾ Supports Remote and Web management
- 3 -
To Next Page
Loading...
