TP-Link 54Mbps Wireless Access Point TL-WA501G - Password; Log

TL-WA501G 54M Wireless Access Point User Guide
Figure 5-25: Reboot the AP
Click the Reboot button to reboot the AP.
Some settings of the AP will take effect only after rebooting, which include:
• Change LAN IP Address. (System will reboot automatically)
• MAC Clone (system will reboot automatically)
• DHCP service function.
• Static address assignment of DHCP server.
• Upgrade the firmware of the AP (system will reboot automatically).
• Restore the AP's settings to factory default (system will reboot automatically).
5.7.4 Password
This page (shown in figure 5-26) allows you to change the factory default user name and
password of the AP.
Figure 5-26: Password
It is strongly recommended that you change the factory default user name and password
of the AP. All users who try to access the AP's web-based utility or Quick Setup will be
prompted for the AP's user name and password.
Note: The new user name and password must not exceed 14 characters in length and
must not include any spaces. Enter the new Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.
5.7.5 Log
This page (shown in figure 5-27) allows you to query the Logs of the AP.
- 29 -