1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
AP device.
2. Go to Advanced > System Tools > Diagnostics.
¾ To diagnose using Ping
1 ) Choose Ping as the diagnostic tool to test the connectivity.
2 ) Enter the target IP Address of the tested host.
3 ) Specify the Ping Count, Ping Timeout and Ping Packet Size. (Optional)
4 ) Click Start.
The figure below indicates the proper connection between the device and the IP
address 192.168.0.123 tested through Ping.
¾ To diagnose using Traceroute
1 ) Choose Traceroute as the diagnostic tool to test the connectivity.
To Next Page
Loading...
