EasyManua.ls Logo

TP-Link Archer VR200v - Local Upgrade; Back up and Restore Configuration Settings

TP-Link Archer VR200v
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
110
Chapter 14
Administrate Your Network
If there’s any new important firmware update for your router, you will see the notification (similar as shown
below) on your computer when open a new web page. Click Upgrade now, and log in to the web management
page. You will see the Firmware Upgrade page.
3. Focus on the Online Upgrade section, and click Upgrade.
4. Wait a few moments for the upgrading and rebooting.
14. 2. 2. Local Upgrade
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkmodem.net, and log in with the password you set for the router.
3. Go to Advanced > System Tools > Firmware Upgrade.
4. Focus on the Device Information section. Make sure the downloaded firmware file
matches with the Hardware Version.
5. Focus on the Local Upgrade section. Click Browse to locate the downloaded new
firmware file, and click Upgrade.
6. Wait a few moments for the upgrading and rebooting.
5.
14. 3. Back up and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the modem router

Table of Contents

Related product manuals