TP-Link Archer VR600v

Other manuals for TP-Link Archer VR600v

Questions and Answers:

J
John StricklandJul 27, 2025
What to do if I forgot my TP-Link Archer VR600v Network Router password?
- M
  Morgan ChristianJul 27, 2025
  If you've forgotten your TP-Link Network Router password, and you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset the password. Alternatively, reset the router, and then visit http://tplinkmodem.net to create a new login password. Note that the default Wireless Password/PIN is printed on the product label of the modem router. If the default wireless password has been changed, log in to the modem router’s web management page and go to Basic > Wireless to retrieve or reset your password.
A
Anthony TannerAug 1, 2025
Why can't I access the internet with my TP-Link Archer VR600v Network Router?
- G
  garciamelissaAug 1, 2025
  If your TP-Link Network Router isn't connecting to the internet, check that all connectors, including the telephone line, Ethernet cables, and power adapter, are well connected. Then, check if you can log in to the web management page of the modem router. Ensure that your VPI/VCI, Connection Type, account username, and password are correct by consulting your ISP. Restore your modem router to its factory default settings and reconfigure it using the Quick Setup Wizard.
R
Rebecca GreenAug 6, 2025
What to do if I can't log in to my TP-Link Network Router web page?
- S
  Susan FitzpatrickAug 6, 2025
  If you cannot log in to your TP-Link Network Router's web management page, ensure the modem router connects to the computer correctly and the corresponding LED indicator(s) light up. Also, make sure the IP address of your computer is configured to obtain an IP address and DNS server address automatically. Verify that the default access you input is correct. You may also try changing your web browser or computer and log in again. As a last resort, reset the modem router to factory default settings.
S
Scott SmithAug 16, 2025
How to reset a TP-Link Archer VR600v Network Router to factory settings?
- R
  Robert IbarraAug 16, 2025
  To restore your TP-Link Network Router to its factory default settings, press and hold down the Reset button on the side panel for 10 seconds until all LEDs turn on momentarily, then release the button.
K
karenmooreAug 20, 2025
How to reset TP-Link Network Router to factory settings?
- L
  lopeztylerAug 20, 2025
  To restore your TP-Link Network Router’s configuration to its factory default settings, you can use the Reset button; refer to the related button description for details. You can also use the Backup & Restore page; refer to the instructions in To _reset the modem router to factory default settings._ for details.

TP-Link Archer VR600v Specifications

General

Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1600 Mbit/s
WLAN data transfer rate (first band)	1300 Mbit/s
WLAN data transfer rate (second band)	300 Mbit/s
VPN support	PPTP, L2TP, IPSec Passthrough
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Memory card slot(s)	No
RJ-11 ports quantity	3
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
NAT functionality	NAT firewall
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2
Supported network protocols	IPv4, IPv6
Antenna gain level (max)	23 dBi
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Output current	2.5 A
Output voltage	12 V
Power source type	AC, PoE
Product type	Tabletop router
Product color	Black, Silver