EasyManua.ls Logo

TP-Link Archer VR600v - Configuring DECT Settings

TP-Link Archer VR600v
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Chapter 6
Telephony
2. Enter the PIN (Default: 0000) on the DECT handset if required.
Notes:
1. Up to six DECT handsets can be registered on the modem router.
2. If you press the DECT button for more than 4 seconds, and the Phone LED still does not light, release the button and try again.
Method 2: Via Web Management Interface
Follow the steps below to register:
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > Telephony > Telephony Devices to open the registration page.
3. Click Register New DECT Handset and follow instructions on the page to register
your DECT handset.
6. 2. 2. Configuring DECT Settings
Configure DECT settings on the web management page of the modem router.
Follow the steps below to configure:
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > Telephony > DECT, and you will see the following screen.

Table of Contents

Other manuals for TP-Link Archer VR600v

Related product manuals