47
Chapter 8
USB Settings
8. 1. Access the USB Storage Device
Insert your USB storage device into the modem router’s USB port and then access files
stored there locally or remotely.
Tips:
• If you use USB hubs, make sure no more than 4 devices are connected to the modem router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS. Some modem routers also support
the HFS+ and exFAT file systems.
• Before you physically disconnect a USB device from the modem router, safely remove it to avoid data
damage: Go to Advanced > USB Sharing > USB Storage Device and click .
8. 1. 1. Access the USB Device Locally
Insert your USB storage device into the modem router’s USB port and then refer to the
following table to access files stored on your USB storage device:
Windows
computer
¾ Method 1:
Go to Computer > Network, then click the Network Server Name
(ARCHER_model number by default) in the Computer section. Use
admin for both username and password to access the storage
device.
Note:
1. Operations in different systems are similar. Here we take Windows 7 as an example.
2. Network Server Name can be customized on the web management page.
To Next Page
Loading...
