Related Document
The User Guide and CLI Reference Guide of the product are provided on the
resource CD.
To obtain the latest product information, please visit the Official Website:
http://www.tp-link.com
About this Installation Guide
This Installation Guide describes the hardware characteristics, installation methods
and the points that should be attended to during installation.
This Installation Guide is structured as follows:
Chapter 1 Introduction. This chapter describes the External Components of the
switch.
Chapter 2 Installation. This chapter illustrates how to install the switch.
Chapter 3 Lightning Protection. This chapter illustrates how to prevent lightning
damage.
Chapter 4 Connection. This chapter illustrates how to do the physical connection
of the switch.
Chapter 5 Configuration. This chapter instructs you to configure the switch via
Web Interface and CLI commands.
Appendix A Troubleshooting.
Appendix B Hardware Specifications.
Audience
This Installation Guide is for:
Network Engineer Network Administrator
Conventions
■
The figures in Chapter 2 to Chapter 4 are for demonstration purposes only. Your
switch may differ in appearance from that depicted.
■
This guide uses the specific formats to highlight special messages. The following
table lists the notice icons that are used throughout this guide.
Remind to be careful. A caution indicates a potential which
may result in device damage.
Remind to take notice. The note contains the helpful
information for a better use of the product.
To Next Page
Loading...
Need help?
General