Need help?Do you have a question about the TP-Link JetStream T1600G-28TS and is the answer not in the manual?
General| Switching Capacity | 56 Gbps |
|---|---|
| MAC Address Table | 16K entries |
| Jumbo Frame | 9KB |
| Input Voltage | 100-240VAC, 50/60Hz |
| Certifications | CE, FCC, RoHS |
| Product Type | Managed |
| SFP Slots | 4 x SFP slots |
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1D, IEEE 802.1s, IEEE 802.1w |
| Dimensions (W x D x H) | 440 x 180 x 44 mm |
| Weight | 2.2 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| Power Supply | Internal |
| Mounting | Rack-mountable |
| Quality of Service | IEEE 802.1p QoS |
| VLAN | Voice VLAN |
| Security | IEEE 802.1X, Port Security |
| Ports | 24 x Gigabit Ethernet ports |
| Forwarding Rate | 41.7 Mpps |
| Access Control List | L2~L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports, 802.1p, DSCP, protocol and VLAN ID Time Range based ACL |
Guides users on accessing the switch's web management interface via a browser.
Explains how to navigate and configure the switch via the main setup menu.
Covers address table, static, dynamic, and filtering address configurations.
Configures port parameters for CIST, including priority, cost, and roles.
Details STP global configuration, parameters, and summary.
Details IGMP snooping process, messages, timers, and configurations.
Explains MLD snooping process, messages, timers, and configurations for IPv6.
Configures Layer 3 virtual interfaces, IP addresses, and subnet masks.
Details priority modes, schedule modes, 802.1P, and DSCP priority settings.
Configures Voice VLANs for prioritizing voice data streams and quality.
Sets up PoE function, system power limits, and port PoE status.
Covers ACL summary, creation, MAC ACL, Standard-IP ACL, and Extend-IP ACL.
Covers binding ACLs to specific ports and VLANs.
Details policy summary, creation, and action configuration for packet control.
Details binding policies to ports or VLANs for effect.
Explains binding ACLs to ports or VLANs for effect.
To Next Page