TP-Link JetStream T1600G-28TS - Poe Profile

168
PoE Priority:
The priority levels include High, Middle and Low in descending
order. When the supply power exceeds the system power limit,
the port with lower priority will stop supplying power
; If these ports
have the same priority levels, the port with smaller
port number
will stop supplying power first.
Power Limit
(0.1w-30w):
Defines the max power the corresponding port can supply. Class1
represents 4W, Class2 represents 7W, Class3 represents 15.4W
and Class4 represents 30W.
Time Range: Select the time range for the PoE port to supply power. If
No limit
is selected, the PoE port will supply power all the time.
PoE Profile: Select the profile
you want to apply to the selected port. If a PoE
Profile is selected, the three attributes including PoE Status, Po
E
Priority and Power Limit are not available.
Power (W): Displays the port's real time power supply.
Current (mA): Displays the port's real time current.
Voltage (V): Displays the port's real time voltage.
PD Class: Displays the class the linked PD (Powered Device) belongs to.
Power Status: Displays the port's real time power status.
11.1.2 PoE Profile
PoE (Power over Ethernet) Profile is a short cut for the configuration of the PoE port. You can
create some profiles to be applied to the ports. In a profile, the PoE status, PoE priority and Power
limit are configured.
Choose the menu PoE→PoE Config→Profile Profile to load the following page.
Figure 11-2 Profile Config
The following items are displayed on this screen:

Cre ate PoE Profile
Profile Name: Enter the name of the profile.