15
Chapter 4 System
The System module is mainly for system configuration of the switch, including four submenus:
Syste m Info, User M anageme nt, System Tools and Access Security.
4.1 System Info
The System Info, mainly for basic properties configuration, can be implemented on Sys t e m
Summary, Device Description, Syste m Time , Daylight Saving Time and Syste m IPv6 pages.
4.1.1 System Summary
On this page you can view the port connection status and the system information.
The port status diagram shows the working status of 48 10/100/1000Mbps RJ45 ports and 4 SF P
ports of the switch.
Choose the menu Syste m→System Info→Syste m Summary to load the following page.
Figure 4-1 System Summary
Port Status
Indicates the 1000Mbps port is not connected to a device.
Indicates the 1000Mbps port is at the speed of 1000Mbps.
Indicates the 1000Mbps port is at the speed of 10Mbps or 100Mbps.
Indicates the SFP port is not connected to a device.
Indicates the SFP port is at the speed of 1000Mbps.
When the cursor moves on the port, the detailed information of the port will be displayed.
Figure 4-2 Port Information
To Next Page
Loading...
