TP-Link JetStream T1600G-28TS - Port Binding

180
12.3.2 Port Binding
On this page you can bind a ACL to a port.
Choose the menu ACL→ACL Binding→Port Binding to load the following page.
Figure 12-10 Bind the policy to the port
The following entries are displayed on this screen:

Port-Bind Config
ACL ID: Select the ID of the ACL you want to bind.
Port: Select the number of the port you want to bind.

Port-Bind Table
Index: Displays the index of the binding ACL.
ACL ID: Displays the ID of the binding ACL.
Port: Displays the number of the port bound to the corresponding ACL.
Direction: Displays the binding direction.