35
IP Address & Mask These fields is available to configure only when IP-
selected. Only the users within the IP-
allowed for login.
M AC Ad d re ss: The field is available to configure only when MAC-
based mode is
selected. Only the user with this MAC Address you set here are
allowed for login.
Port: The field is available to configure only when Port-
selected. Only the users connecting to the ports selected are
allowed to manage the switch.
4.4.2 HTTP Config
With the help of HTTP (Hyper Text Transfer Protocol), you can manage the switch through a
standard browser. The standards development of HTTP was coordinated by the Internet
Engineering Task Force and the World Wide Web Consortium.
On this page you can configure the HTTP function.
Choose the menu Syste m→Access Security→HTTP Config to load the following page.
Figure 4-19 SSL Config
The following entries are displayed on this screen
:
Global Config
HTTP: Select Enable/Disable the HTTP function on the switch.
Session Config
Session Timeout:
If you do nothing with the Web management page within the
timeout time, the system will log out automatically. If you want to
reconfigure, please login again.
Access User Number
Number Control: Select Enable/Disable the Number Control function.
To Next Page
Loading...
