137
Clear Binding: Click the Cle ar Binding
button to clear all profiles bound
to the port.
Configuration Procedure:
Step Operation Description
1 Create Profile
Required. Configure the Profile ID and mode on
Multicast→MLD Snooping→Profile Config page.
2 Configure IP-Range Required. Click Edit of the specified entry in the MLD Profile
Info table on Multicast→MLD Snooping→Profile Config
page to configure the mode or IP-range of the Profile.
3
Configure Profile Binding
Optional. Configure Profile Binding for ports on
Multicast→MLD Snooping→Porfile Binding page.
8.2.8 Packet Statistics
On this page you can view the MLD packets the switch received. It helps you to monitor the MLD
snooping function.
Choose the menu Multicast→MLD Snooping→Packet Statistics to load the following page.
Figure 8-20 Packet Statistics
To Next Page
Loading...
