136
Choose the menu Multicast→MLD Snooping→Profile Binding to load the following page.
Figure 8-19 Profile Config
The following entries are displayed on this screen:
Profile and Max Group Binding
UNIT:1/LAGS: Click 1 to configure the physical ports. Click LAGS to
configure the link aggregation groups.
Select:
Select the desired port for multicast filtering. It is
multi-optional.
Port: The port to be bound.
Profile ID: The existing Profile ID bound to the selected port.
Max Group: T
he maximum multicast group a port can join, range
from 0 to 1000.
Overflow Action:
The policy should be taken when the number of
multicast group a port has joined reach the maximum.
Drop:
Drop the successive report packet, and this
port cannot join any other multicast group.
Replace:
When the number of the dynamic multicast
groups that a port joins has exceeded the max-group,
the newly joined multicast group will replace an
existing multicast group with the lowest multicast
group address.
LAG: The LAG number which the port belongs to.
To Next Page
Loading...
