MED devices are comprised of two primary device types:
Network Connectivity Devices and Endpoint Devices. In turn,
ices are composed of three defined Classes: Class I,
Class II and Class III. Bridge is a Network Connectivity Device.
15.4.2 Port Config
On this page you can configure all ports' LLDP-MED parameters.
Choose the menu LLDP→LLDP-MED→Port Config to load the following page.
Figure 15-7 LLDP-MED Port Configuration
The following entries are displayed on this screen:
LLDP-MED Port Config
Port: Displays local device's port number.
LLDP-M ED Status: Configure the port's LLDP-MED status:
Enable: Enable the port's LLDP-
MED status, and the port's Admin
Status will be changed to Tx&Rx.
Disable: Disable the port's LLDP-MED status.
Included TLVs: Select TLVs to be included in outgoing LLDPDU.
Detail: Click the Detail button
to display the included TLVs and select the
To Next Page
Loading...
