TP-Link JetStream T1600G-28TS - Port Config

128
M e mber Port Time :
Enter the global member port aging time. If the member port
does not receive Report Message in the aging time, it will be
aged.
Last Listener Query
Interval:
Enter the interval between the switch sends out MASQs.
Last Listener Query
Count:
Enter the number of MASQs that the switch sends before aging
out a multicast address when there is no MLD report response.

MLD Snooping Status
Description: Displays MLD snooping status.
M e mber: Displays the member of the corresponding status.
Note:
Configurations of the Router Port Time and Member Port Time in 8.2.3 VLAN Config override their
global configurations here.
8.2.2 Port Config
On this page you can configure MLD Snooping function with each single port.
Choose the menu Multicast→MLD Snooping→Port Config to load the following page.
Figure 8-14 Port Config
The following entries are displayed on this screen:

Port Config
UNIT:1/LAGS Click 1 to configure the physical ports. Click LAGS to