TP-Link JetStream T1600G-28TS - SNMP Config; Global Config

218
3. Create SNMP User
The User configured in a SNMP Group can manage the switch via the client program on
management station. The specified User Name and the Auth/Privacy Password are used for
SNMP Management Station to access the SNMP Agent, functioning as the password.
SNMP module is used to configure the SNMP function of the switch, including three submenus:
SNM P Config, Notification and RMON.
14.1 SNMP Config
The SNMP Config can be implemented on the Global Config, SNM P View, SNM P Group,
SNM P Use r and SNMP Community pages.
14.1.1 Global Config
To enable SNMP function, please configure the SNMP function globally on this page.
Choose the menu SNM P→SNM P Config→Global Config to load the following page.
Figure 13-3 Global Config
The following entries are displayed on this screen:

Global Config
SNM P:
Enable/Disable the SNMP function.

Local Engine
Local Engine ID:
Specif
y the switch’s Engine ID for the remote clients. The
Engine ID is a unique alphanumeric string used to identify the
SNMP engine on the switch.

Remote Engine
Remote Engine ID:
Specify the Remote Engine ID for switch. The Engine ID is a
unique alphanumeric
string used to identify the SNMP engine
on the remote device which receives traps and informs from
switch.