TP-Link JetStream T1600G-28TS - Event

230
14.3.3 Event
On this page, you can configure the RMON events.
Choose the menu SNM P→RMON→Event to load the following page.
Figure 13-11 Event Config
The following entries are displayed on this screen:

Event Table
Select:
Select the desired entry for configuration.
Index:
Displays the index number of the entry.
Use r:
Enter the name of the User or the community to which the
event belongs.
Description:
Give a description to the event for identification.
Typ e :
Select the event type, which determines the act way of the
network device in response to an event.
 None: No processing.
 Log: Logging the event.
 Notify: Sending trap messages to the management
station.
 Log&Notify: Logging the event and sending trap
messages to the management station.
Owner:
Enter the name of the device or user that defined the entry.
Status:
Select Enable/Disable the corresponding event entry.