Need help?Do you have a question about the TP-Link kasa smart KS200 and is the answer not in the manual?
Provides the HomeKit numeric code necessary for initial setup and pairing.
Explains how to identify Ground, Neutral, Line, and Load wires.
Instructions to turn off power and remove the old wallplate.
Steps for removing the old switch and disconnecting wires.
Guide to labeling and connecting wires to the new smart switch.
Instructions for folding wires and securing the new switch into the wall box.
Steps to attach the wallplate and restore power to the installed switch.
Guide to downloading and installing the Kasa Smart application on a mobile device.
Instructions for logging into an existing or creating a new TP-Link ID.
Process for adding the new smart switch within the Kasa Smart app.
Lists requirements like stable Wi-Fi and updated iOS/iPadOS for HomeKit setup.
Steps to add the smart switch to the Apple Home app using its QR code.
Lists common issues and solutions for failures when adding to HomeKit.
Warns about the risk of electric shock during servicing and installation.
To Next Page
General