TP-Link NC260 - Basic Settings Overview; Basic Status Information

NC260
12
Click to select the
Auto/Day/Night
mode.
Auto: This
mode will automatically
switch between Day and Night modes based
on the amount of available lighting.
Day: This sets the camera to always be
in the Day mode.
Night: This sets the camera to always be
in the Night mode.
 Brightness: Drag the slider to adjust the brightness level of
camera. Large value will brighten the current displayed screen.
 Contrast: Drag the
slider to adjust the contrast level of the
camera. Large value will contrast the current displayed screen heavily.
 Saturation: Drag the
slider to adjust the saturation level of the
camera. Large value will saturate the current displayed screen to be more colorful.
 Preset: Click the Preset button to restore to factory image settings.
4.3 Basic
Click the Basic menu to display the submenus including Status, Network, Wireless Connection,
Cloud Setting, and LED.
4.3.1 Basic > Status
The Status page displays the current configuration information of the camera. All the
information is read-only.