TP-Link NC260 - Rear Panel Components

NC260
4
 System LED:
Status
Indication
Flashing Red
The camera starts booting up.
Solid Red
The camera has boot up, but is not connected to any
network.
Flashing Green
The camera is in firmware upgrade procedure.
The camera is connecting to a network.
Solid Green
The camera is connected to a network.
The camera is transferring data.
 Microphone: The camera has a built-in internal microphone. This microphone is hidden in
the pinhole located on the front panel.
 Micro SD Card Slot: For holding the micro SD card.
2.2.2 Rear Panel
Rear Panel
 Power Jack: For connecting the camera to a power socket via the provided power adapter.
 Internet Port: For connecting the camera to your router via an Ethernet cable.
 Speaker: For audio output.