28
Motion Detection: To enable or disable the motion detection function. The area with blue
mask indicates that it is the area with motion detection on. All areas are selected by default.
You can drag your mouse to draw specific areas that you want to monitor.
Sensitivity: Select one of the three levels of sensitivity from the drop-down list: High,
Medium, and Low. Snapshots will be triggered and sent to FTP when the motion meets the
level of sensitivity. And notification messages will be sent to the tpCamera app in your
smartphone.
Click Save to save and enable the settings.
4.4.8 Advanced > SD Card
SD Card function allows you to save snapshots and videos in your SD card. The SD card is not
provided, and you need to insert a micro SD card into the SD card slot on the back of the
camera.
To Next Page
Loading...
