14
Static IP: Select this option when a static or fixed IP address is obtained for the camera. A
static IP address will ease your access to the camera in the future. Add your camera’s
static IP information to your router to avoid IP conflicts.
• MAC Address: Displays the Ethernet MAC address of the camera. The MAC address is
read-only.
• IP Address: Enter a fixed IP address for the camera in dotted-decimal notation.
• Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is
“0.0.0.0.”
• Default Gateway: Enter the default gateway in dotted-decimal notation.
• Primary DNS Server: Enter a DNS address in dotted-decimal notation.
• Secondary DNS Server: Enter a DNS address in dotted-decimal notation.
Click Save to save and enable the settings.
4.3.3 Basic > Wireless Connection
The camera’s wireless function is enabled by default. This function helps to connect your
camera to a wireless network wirelessly. If you don’t want to use this function, just select the
Disable option.
To Next Page
Loading...
