TP-Link NC260 - Page 24

NC260
22
 HTTP Port: The default value is 80. If you want to use a port number other than 80, enter a
port number between 1 and 65535.
Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of
computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols
to allow devices to automatically discover each other without the need to enter IP addresses or
configure DNS servers.
 Bonjour: To enable or disable the Bonjour service.
 Bonjour Name: Displays the Bonjour name. By default, it is a combination of device name
and the last six characters of the camera’s MAC address.
Click Save to save and enable the settings.