13
Chapter 3
3. Change the Powerline Network Name. You can also click Reset Powerline
Defaults to use the default network name, e.g. HomePlugAV. However, if the
default name is used, the Wi-Fi Move function will be automatically disabled.
4. Click Save to make the settings effective.
3. 2. 2. Soft Pair
You can use the Soft Pair feature to pair this device with other powerline devices
to form a powerline network, or leave a powerline network.
• To form a powerline network.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the password you set for the extender.
2. Go to Powerline > Soft Pair.
To Next Page
Loading...
