TP-Link PGW2440 - Network; LAN Settings; DHCP Server

23
Chapter 3
3. 10. Network
3. 10. 1. LAN Settings
Follow the steps below to configure LAN settings of the extender.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the password you set for the extender.
2. Go to Network > LAN Settings.
Select to have your extender automatically obtain IP Address from the main
router or select to manually configure the LAN parameters.
IP Address: The IP address of the powerline extender.
Subnet Mask: The subnet mask associated with IP address.
Default Gateway: The IP address of the gateway device.
3. 10. 2. DHCP Server
Follow the steps below to configure DHCP Server of the extender.