TP-Link PGW2440 - How to Set up a Onemesh; TM Network

34
Chapter 4
4. 2. How to Set Up a OneMesh
TM
Network
You can manage all mesh devices in the OneMesh
TM
network all on your router’s
web page.
Follow the steps below to create a OneMesh
TM
network.
1. Connect the extender to your computer wirelessly. Visit http://tplinkplc.net,
and log in with the password you set for the extender.
2. Go to
OneMesh and toggle on Join OneMesh. When the extender’s 2.4
GHz and 5 GHz Wi-Fi LEDs
turn solid on, Wi-Fi settings are copied.
Note: This function is available only when your extender is connected to a OneMesh
TM
Router.
3. Enjoy the internet using your router’s SSID and password.