17
Chapter 3
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the password you set for the extender.
2. Go to Wi-Fi > Wireless Settings page.
• To enable or disable the wireless function:
Select the box to enable the wireless Radio of 2.4GHz or 5GHz. Deselect the box
to disable wireless function. If disabled, all wireless settings will be ineffective.
• To change the wireless network name (SSID) and wireless password:
The default SSID is TP-Link_XXXX for 2.4GHz network and TP-Link_XXXX_5G
for 5GHz network, and the default password is printed on the label at the side
To Next Page
Loading...
