45
Chapter 7 Manage Your Extender
7. 4. 1. Online Upgrade
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Settings > System Tools > Firmware Upgrade.
3. Click CHECK FOR UPGRADE and follow the web instructions to upgrade online.
7. 4. 2. Local Upgrade
1. Download the latest firmware file for the extender from our website
www.tp-link.com.
2. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
3. Go to Settings > System Tools > Firmware Upgrade.
4. Click BROWSE to locate the downloaded new firmware file, and then click UPGRADE.
5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot.
7. 5. Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the extender. You can
backup the configuration file and restore the extender to the previous settings from the
backup file when needed. Moreover, if necessary, you can erase the current settings
and reset the extender to the default factory settings.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
