What to do if I forget my TP-Link Extender password?
If you've forgotten your login password for your TP-Link Extender, you can restore the extender's configuration to its factory default settings. Alternatively, try using the default username and password: admin, admin. You might also try reconfiguring your extender by following the instructions in this guide.
How to factory reset TP-Link RE580D?
To restore your TP-Link Extender's configuration to its factory default settings, power on the extender, then use a pin to press and hold the RESET button until all LEDs turn on momentarily; then release the button. Alternatively, you can restore the default settings from the 'System Tools > Restore & Backup' section of the extender's web-based management page.
Why is my TP-Link Extender speed so slow?
The wireless transmission rate may slow down on your TP-Link Extender because, in compliance with the wireless transmission protocol, all extender devices are set to work in half-duplex instead of full-duplex mode. TP-Link recommends connecting to the extender when your home network connection is poor, or when you want larger wireless coverage to eliminate 'dead zones'.
What to do if I cannot access TP-Link RE580D configuration page?
If you cannot access the web-based configuration page for your TP-Link Extender, first check that all connections (wireless or wired) are properly established. Then, try to obtain an IP address and gateway. If successful, open your web browser, enter the default domain http://tplinkrepeater.net in the address field, and log in. As another option, you can reset the device and then use the default IP address to access the web-based configuration page and reconfigure the device.
General| Type | Network transmitter |
|---|---|
| Maximum transfer distance | - m |
| Windows operating systems supported | Yes |
| Certification | CE, FCC |
| Antennas quantity | 3 |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA2-PSK |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Wi-Fi data rate (max) | 1900 Mbit/s |
| Ethernet LAN (RJ-45) ports | 5 |
| Output current | 2.5 A |
| Output voltage | 12 V |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 30 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package depth | 240 mm |
| Package width | 340 mm |
| Package height | 76 mm |
| Sustainability certificates | RoHS |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 162 mm |
|---|---|
| Width | 242 mm |
| Height | 44 mm |
To Next Page
