Omada Stackable L3 Managed Switch
03Introduction
LEDs
For SG6428X and SG6654X
PWR1* PWR2 Indication
Green On Off
The switch is powered by PWR1.
PWR2 is disconnected or it works improperly.
Green On Yellow On**
The switch is powered by PWR1.
PWR1 and PWR2 are connected.*
Off Green On
The switch is powered by PWR2.
PWR1 is disconnected or it works improperly.
Off Off
The switch is powered off or both PWR1 and PWR2 work
improperly.
LED Indication
SYS
Flashing: The switch works properly.
On or Off: The switch works improperly.
FAN
Green On: All the fans work properly.
Yellow On: Not all the fans work properly.
MGMT
On: A device is linked to the port.
Flashing: Transmitting or receiving data.
Off: No device is linked to the port.
MST
On: The device functions as the master switch in the stack topology or it works
individually.
Off: The device functions as the member switch in the stack topology.
Port 1-24 of
SG6428X/
Port 1-48 of
SG6654X
(When the SPEED
LED is on)
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Yellow On: Running at 10Mbps/100 Mbps, but no activity.
Yellow Flashing: Running at 10Mbps/100 Mbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Port 1-24 of
SG6428X/
Port 1-48 of
SG6654X
(When the STK LED
is on)
On: The port number indicates the unit ID in the stack topology.
Port 25-28
of SG6428X/
Port 49-54 of
SG6654X***
Green On: Running at 10 Gbps, but no activity.
Green Flashing: Running at 10 Gbps and transmitting or receiving data.
Yellow On: Running at 1 Gbps, but no activity.
Yellow Flashing: Running at 1 Gbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
*PWR1 is the primary power supply and it takes priority over PWR2.
**When both PWR1 and PWR2 work properly and the switch is powerd by PWR1, it takes 10-20 seconds for
the LED PWR2 (yellow) to go out after PWR2 is unplugged.
***All 10 Gbps SFP+ slots can be used as uplink ports or stack ports.
To Next Page
Loading...
