TP-Link SG6654X - Page 8

Omada Stackable L3 Managed Switch
04 Introduction
For SG6428XHP and SG6654XHP
LED Indication
PWR1*
PWR2
Green On: The power supply works properly.
Green Flashing: The power supply module is not compatible with the switch.
Yellow On: The power supply works properly but the switch is powered by the other
power supply.**
Yellow Flashing: The power supply module is plugged in properly but there's is no AC
power input; abnormal power supply.
Off: No power supply module is inserted.
SYS
Flashing: The switch works properly.
On or Off: The switch works improperly.
FAN
Green On: All the fans work properly.
Yellow On: Not all the fans work properly.
PoE MAX
On: The remaining PoE power is ≤ 7 W.
Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes.
Off: The remaining PoE power is > 7 W.
MGMT
On: A device is linked to the port.
Flashing: Transmitting or receiving data.
Off: No device is linked to the port.
MST
On: The device functions as the master switch in the stack topology or it works
individually.
Off: The device functions as the member switch in the stack topology.
Port 1-24 of
SG6428XHP/
Port 1-48 of
SG6654XHP
(When the SPEED
LED is on)
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Yellow On: Running at 10Mbps/100 Mbps, but no activity.
Yellow Flashing: Running at 10Mbps/100 Mbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Port 1-24 of
SG6428XHP/
Port 1-48 of
SG6654XHP
(When the STK LED
is on)
On: The port number indicates the unit ID in the stack topology.
Port 1-24 of
SG6428XHP/
Port 1-48 of
SG6654XHP
(When the PoE LED
is on)
Green On: The port is supplying power normally.
Green Flashing: The supply power exceeds the correponding port's maximum power.
Yellow On: Overload or short circuit is detected.
Yellow Flashing: Power-on self-test failed.
Off: Not providing PoE power on the port
Port 25-28 of
SG6428XHP/
Port 49-54 of
SG6654XHP***
Green On: Running at 10 Gbps, but no activity.
Green Flashing: Running at 10 Gbps and transmitting or receiving data.
Yellow On: Running at 1 Gbps, but no activity.
Yellow Flashing: Running at 1 Gbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.