TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4) How to enable DMZ Host: Log in to the modem router, click the “Advanced Setup-NAT” menu
on the left of your browser, and click "DMZ Host" submenu. On the "DMZ" page, type your IP
address into the “DMZ Host IP Address” field, using 192.168.1.222 as an example, remember
to click the Save/Apply button.
4. I want to build a WEB Server on the LAN, what should I do?
Log in to the modem router, click the “Advanced Setup-NAT” menu on the left of your browser,
92
To Next Page
Loading...
