TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
2) Use the Factory Default RESET button: With the modem router powered on, use a pin to press
and hold the RESET button for at least 5 seconds. And the modem router will reboot to its
factory default settings.
¾ WPS: The switch for the WPS function. For details, please refer to 4.5.2.1 WPS Setup
¾ ON/OFF: The switch for the power.
¾ POWER: The Power plug is where you will connect the power adapter.
¾ Wireless Antenna: To receive and transmit the wireless data.
6
To Next Page
Loading...
