TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-54
4.4.11.1 DNS Server
Choose “Advanced Setup”Æ“DNS”Æ“DNS Server”, and you can see the DNS Server
Configuration screen as shown in Figure 4-55.
Figure 4-55
For PPPoA, PPPoE enabled PVC(s), please select the Select DNS Server Interface from
available WAN interfaces checkbox, this modem router will accept automatically the first
received DNS assignment from the selected configured WAN interface during the connection
establishment.
For single PVC with IPoA, static IPoE protocol, please select the Use the following Static DNS IP
address checkbox, and enter the primary and /or optional secondary DNS server IP addresses
provided by your ISP.
Here you can also select a configured WAN interface for IPv6 DNS server or enter the static IPv6
DNS server Addresses provided by your ISP.
Click the Save/ Apply button to save the new configuration.
52
To Next Page
Loading...
