70
Chapter 12
Administrate Your Network
3. Enter the old password. Enter the new password and enter again to confirm.
4. Click Save to make the settings effective.
12. 7. Local Management
You can control the local devices’ authority to manage the router via the Local
Management feature. By default all local connected devices are allowed to manage the
router. You can also allow only one device to manage the router.
Follow the steps below to specify the local management.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > System Tools> Administration page. Locate the Local
Management section.
3. Keep the Port for HTTP as the default settings.
4. If you only want to allow one specific device to manage the router, enable Only
Allow the Following IP/MAC and then enter the IP Address or MAC Address of the
device in the IP/MAC Address field.
5. Click Save to make the settings effective.
12. 8. Remote Management
By default, the remote devices are not allowed to manage the router from the internet.
To Next Page
Loading...
