34
P.
e transmission port number of the video data. Specify an even
0 x 240, and 160 x 120.
” stands for “frames per second”.
to the frame rate.
Quality: You can select the value of quality among Medium, Standard, Good, Detailed
6, 384, 512, 768, 1024, 1280, 1536, and 2048 kbps.
able image quality for Fixed Quality or Fixed Bitrate, please refer to the
A. Frame-rate & Bitrate Table
¾ Viewer Authentication: If the viewer authentication is On, the users will be requested to key in
username and password when viewing through RTS
¾ Multicast Streaming (If it’s on):
z Multicast Address: Specify the multicast server address.
z Video / Audio Port: Specify th
number from 1024 to 65535.
z Time-to-Live: Set the maximum TTL that multicast can pass through. Specify the value from 1
to 255.
¾ Image Size: Specify the image size when the network camera transmits. You can choose among
640 x 480, 32
¾ Frame Rate: Set the frame rate of the MPEG4 image. You can choose values from 1, 2, 3, 4, 5, 7,
10, 15, 20, 25, and 30 fps. The unit “fps
¾ Quality:
z Auto: The quality and bitrate will be adjusted automatically according
z Fixed
and Excellent.
z Fixed Bitrate: Set the bitrate of MPEG4 image transmission for a line. You can select the value
from 64, 128, 25
)
Note:
Concerning how to select the suit
APPENDIX .
B. Mobile View
If RTSP is On (please check “Setting → Basic → Camera → General”.), the option of Viewer
Authentication and Multicast Streaming will appear.
To Next Page
Loading...
