35
off, Mobile View will be disabled.
Viewer Authentication: If the viewer authentication is On, the users will be requested to key-in
hrough RTSP.
e transmission port number of the video data. Specify an even
Set the frame rate of the MPEG4 image. You can choose values from 5 and 10fps.
utomatically according to the frame rate.
Quality: You can select the value of quality among Medium, Standard, Good, Detailed
64, 128, and 256 kbps.
able image quality for Fixed Quality or Fixed Bitrate, please refer to the
A. Frame-rate and Bitrate Table
)
Note:
If RTSP is
¾
username and password when viewing t
¾ Multicast Streaming (If it’s on):
z Multicast Address: Specify the multicast server address.
z Video / Audio Port: Specify th
number from 1024 to 65535.
z Time-To-Live: Set the maximum TTL that multicast can pass through. Specify the value from 1
to 255.
¾ Image Size: The image size of Mobile View is fixed at 320x240 or 160 x 120.
¾ Frame Rate:
The unit “fps” stands for “frames sent per second”.
¾ Quality:
z Auto: The quality and bitrate will be adjusted a
z Fixed
and Excellent.
z Fixed Bitrate: Set the bitrate of MPEG4 image transmission for a line. You can select the value
from 16, 32, 48,
)
Note:
Concerning how to select the suit
APPENDIX
.
7.2.3 MJPEG
If RTSP is Off (please check “Setting → Basic → Camera → General”.), the option of Image Size,
Frame rate and Quality will appear.
To Next Page
Loading...
