60
¾ Effective period: Set the period when the periodical sending is effective.
z Always: The periodical sending is always effective.
z Schedule: You can specify the period when the periodical sending is effective in the Schedule
setting in the other section.
)
Note:
You can set schedule function at schedule page. (Please go to “Setting → Advanced → Schedule
→ Setting”. For more details, please refer to Section 8.8.)
8.5 SMTP
SMTP is used for sending an image via e-mail. By using Mail (SMTP) function, you can send a mail with
attached image file which has been shot linked with the external sensor input or with the built-in motion
detection function. The image file can also be sent periodically. Click the folder of SMTP to display the
sub folders including General, Alarm sending and Periodical sending.
8.5.1 General
Select On when you use the SMTP function. The common setting options are displayed below. Select
Off, if you do not wish to use the e-Mail (SMTP) function.
)
Note:
The setting of General will be the same as the setting of IP Notification. (Please check “Setting →
Basic → Network → IP Notification”.)
¾ SMTP server name: Type the SMTP server name up to 64 characters, or the IP address of the
SMTP server.
¾ SMTP Server Port: You can set port number from 1~65535 according to your mail server. The
default value is 25.
z SSL: Tick SSL box if the mail server you use has security restriction.
To Next Page
Loading...
