TP-Link TL-SG2216 - Static LAG

Figure 5-8 Detailed Information
5.2.2 Static LAG
On this page, you can manually configure the LAG.
Choose the menu Switching→LAG→Static LAG to load the following page.
Figure 5-9 Manually Config
The following entries are displayed on this screen:
 LAG Config
Group Number: Select a Group Number for the LAG.
Description: Displays the description of the LAG.
 Member Port
Member Port: Select the port as the LAG member. Clearing all the ports o
f
the LAG will delete this LAG.
40