-101- 
  IPv6 Address - Display the IPv6 address in colon-hexadecimal notation provided by your 
ISP. 
  IPv6 Address Prefix - Display the IPv6 Prefix Length in dotted-decimal notation provided by 
your ISP. 
  Default Gateway - Display the default gateway in colon-hexadecimal notation provided by 
your ISP. 
If  your  ISP gives  you  one  or  two DNS  IPv6 addresses,  select Use  the following IPv6 DNS 
Servers  and  enter  the  Primary  IPv6  DNS  and  Secondary  IPv6  DNS  into  the  correct  fields. 
Otherwise, the DNS servers will be assigned from ISP dynamically. 
  Primary IPv6 DNS - Enter the DNS IPv6 address in colon-hexadecimal notation provided by 
your ISP. 
  Secondary  IPv6  DNS  -  Enter  another  DNS  IPv6  address  in  colon-hexadecimal  notation 
provided by your ISP. 
 
Note: 
If you get Address not found error when you access a Web site, it is likely that your DNS servers 
are set up improperly. You should contact your ISP to get DNS server addresses. 
  Connection Mode - The way to connect the ISP.   
  Alway On - Connect automatically.   
  Connect Manual - Connect by the user manually.   
Click the Connect button to connect immediately. 
Click the Disconnect button to disconnect immediately. 
  Address Autoconfiguration Type – RADVD (Router Advertisement Daemon) and DHCPv6 
(Dynamic Host Configuration Protocol for IPv6) Server.   
  Site Prefix Configuration Type - The type of IPv6 address prefix.   
  Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will 
delegate it to the LAN.   
  Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your 
ISP to get more information before you configure them.   
  Release Time - The Release Time is the length of time a network user will be allowed to 
keep connecting to the Router with the current DHCPv6 Address. Enter the amount of time, 
in seconds, that the DHCPv6 address will be "leased". The time range is 1~691200 seconds. 
The default value is 86400 seconds.   
  LAN IPv6 Address - Display the LAN IPv6 address created by the device.   
Click the Save button to save your settings.