EasyManua.ls Logo

TP-Link TL-WR1043ND - DHCP Clients List; Address Reservation

TP-Link TL-WR1043ND
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR1043ND
450Mbps Wireless N Gigabit Router
-47-
4.8.2 DHCP Clients List
Choose menu DHCPDHCP Clients List, and then you can view the information about the
clients attached to the router in the next screen (shown in Figure 4-33).
Figure 4-33 DHCP Clients List
ID - The index of the DHCP Client.
Client Name - The name of the DHCP client.
MAC Address - The MAC address of the DHCP client.
Assigned IP - The IP address that the router has allocated to the DHCP client.
Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,
a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.
4.8.3 Address Reservation
Choose menu DHCPAddress Reservation, and then you can view and add a reserved
address for clients via the next screen (shown in Figure 4-34). When you specify a reserved IP
address for a PC on the LAN, that PC will always receive the same IP address each time when it
accesses the DHCP server. Reserved IP addresses should be assigned to the servers that
require permanent IP settings.
Figure 4-34 Address Reservation

Table of Contents

Other manuals for TP-Link TL-WR1043ND

Related product manuals