-45-
Figure 4-30 Guest Network Storage Sharing
User Name - The user name is guest for Guest Network, it can't be changed.
Password - Enter the password in the Password field. The password must be composed of
alphanumeric symbols not exceeding 15 characters in length.
Confirm Password - Re-enter the password here.
Storage Authority - Authority of user: Read Only or Read and Write.
Name - This folder's display name.
Partition - The volume that the folder resides.
Folder - The real full path of the specified folder.
Edit - You can edit the share folder by click edit button.
Delete - You can delete the share folder by click delete button.
Note:
If you want guests visit folders of Guest Network Storage Sharing with guest account, you must
enable Access shared storage with password on the page USB Settings->Storage Sharing, or the
guests can't access to the Guest Network Storage Sharing.
The max share folders number is 6. If you want to share a new folder when the number has
reached 6, you can delete a share folder and then add a new one.
4.8 DHCP
Figure 4-31 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-31): DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
4.8.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, and then you can configure the DHCP Server on the
page (shown in Figure 4-32).The router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the router on the LAN.
To Next Page
Loading...
