-84-
4.15 Advanced Routing
Figure 4-83 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-83: Static
Routing List and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.
4.15.1 Static Routing List
Choose menu “Advanced Routing → Static Routing List”, and then you can configure the
static route in the next screen (shown in Figure 4-84). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
Figure 4-84 Static Routing
To add static routing entries:
1. Click Add New… shown in Figure 4-84, you will see the following screen.
Figure 4-85 Add or Modify a Static Route Entry
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host that
you want to assign to a static route.
To Next Page
Loading...
