TP-Link TL-WR1043ND - Panel Layout; The Front Panel

TL-WR1043ND
450Mbps Wireless N Gigabit Router
-4-
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The router’s LEDs are located on the front panel (View from left to right).
Name
Status
Indication
(Power)
Off
Power is off.
On
Power is on.
(System)
On
The router is initializing or maybe has a system error.
Flashing
The router is working properly.
Off
The router has a system error.
(Wireless )
Off
The wireless function is disabled.
Flashing
The wireless function is enabled.
(Internet)
(Ethernet)
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but there
is no activity.
Flashing
There is an active device linked to the corresponding port.
(WPS)
Slow
Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
Quick
Flash
A wireless device failed to be added to the network by WPS
function.
(USB)
Off
No storage device or printer is plugged into the USB port.
On
A storage device or printer has connected to the USB port.
Table 1-1 The LEDs description