-49-
There are five submenus under the USB Settings menu (shown in Figure 4-36): Storage Sharing,
FTP Server, Media Server, Print Server and User Accounts. Click any of them, and you will be
able to configure the corresponding function.
4.9.1 Storage Sharing
Choose menu “USB Settings→Storage Sharing”, and then you can configure a USB disk drive
attached to the router on this page as shown in Figure 4-37.
Figure 4-37 Storage Sharing
Service Status - Indicates the Storage Sharing service's current status, started or stopped.
You can click the Start button to start the Storage Sharing service and click the Stop button
to stop it.
Volume - The volume name of the USB drive the users have access to.
Capacity - The storage capacity of the USB driver.
Used - The used space of the USB driver.
Free - The available space of the USB driver.
Use% - The percentage of the used space.
Shared - Indicates the shared or non-shared status of the volume. When the volume is
shared, you can click the Disable to stop sharing the volume; when volume is non-shared,
you can click the Enable button to share the volume.
Click the Eject Disk button to safely remove the USB storage device that is connected to
USB port. This takes the drive offline. A message (as shown in Figure 4-38) will appear on
your web browser when it is safe to detach the USB disk.
To Next Page
Loading...
