TP-Link TL-WR1043ND - Page 131

TL-WR1043ND
450Mbps Wireless N Gigabit Router
-122-
Figure B-6
2. Verify the network connection between your PC and the router
Open a command prompt, and type ping 192.168.0.1, and then press Enter.
 If the result displayed is similar to the Figure B-4, it means the connection between your PC
and the router has been established well.
Figure B-4 Success result of Ping command
 If the result displayed is similar to Figure B-5, it means the connection between your PC and
the router failed.