T+A DAC 200 - Technical Specifications

Technical Specications
Analog section
Frequency response + 0 / − 3 dB 0,1 Hz – 200 kHz
Signal / noise ratio 110/114 dB
THD / Intermodulation < 0,001 % / < 0,001 %
Channel separation > 108 dB
Preamplier outputs
(variable or xed output level)
High level (RCA)
0...2,5 Veff
/ 22 Ohm variable,
2,5 Veff
/ 22 Ohm xed
Balanced (XLR)
0...5,0 Veff
/ 22 Ohm variable,
5,0 Veff
/ 22 Ohm xed
Volume control
(bridgeable for the pre-outputs)
Relay controlled in 1 dB steps, - 90 dB to 0 dB
Headphone output 4.4 mm Pentaconn, 6 Ohms output impedance,
discrete power amplier, Class A operation up to 200 mA
Analog input
High level (RCA)
250 mV
eff
... 4,5 V
eff
Digital inputs 1 x AES-EBU 32...192 kHz / 16-24 Bit
S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz /
16-24 Bit and DoP DSD64 (0x05/0xFA Marker)
1 x BNC 32...192 kHz / 16-24 Bit,
2 x USB DAC: Device-Mode 44,1 ... 768 kSps (PCM) and up to
DSD1024*, supports asynchronous data transfer.
*DSD 512 and DSD 1024 with Windows PC and appropriate driver
installed or Linux PC with Kernel 4.4 or higher only. Supports DoP
up to DSD 256 (0x05/0xFA Marker).
2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)
62